MAESTRO Parquet varnish glossy -

MAESTRO parquet varnish is glossy colourless two-component varnish based on polyurethane binders in organic solvent. It is distinguished by great hardness, durability, it is wear and mild chemical resistant.

Product range

MAESTRO parquet varnish glossy

Thinner

Varnish is not to be thinned!

Appearance

Distinguished by high gloss and film thickness.

Drying

TOUCH DRY 2-4 hous/20°C with 65% of relative humidity
FOR SANDING 24 hours
COMPLETELY DRY 48 hours
Thinning ratio 1:1

Coverage

3-4m²/L for three coats depending on surface roughness and absorption.

Application

It is used for protection and decoration of parquet and other wooden floor linings.

How it is applied

Prior to applying parquet varnish, surface needs to be machine sanded; wax needs to be stripped off the old parquet and old varnish needs to be thoroughly sanded. For final sanding use sandpaper no. 150. Resulting sand dust needs to be vacuum cleaned.

Prior to usage, each component needs to be properly shaken!

In a clean and dry bowl mix varnish and contact in volume or weight ratio of 1:1; let the homogenous mass stay for 15 minutes. Time for using (because of hardening) the mixture is 6-8 hours (that is why you should prepare only that quantity of mixture sufficing for one coat).  

It should be applied in one coat by using brush or a special short-bristle roller. Three coats of varnish need to be applied on dry, sanded and cleaned parquet.

If you want to significantly accelerate process of parquet surface protection and keep light and natural wood colour or if you are renewing old previously protected parquet you should use MAESTRO preservation basecoat (1 coat of MAESTRO parquet surface, and 2 coats of MAESTRO GLOSSY PARQUET VARNISH).

Permitted parquet moisture content

8-10%.
First and second coat of varnish needs to be slightly sanded using sandpaper no. 150, and resulting sand dust needs to be vacuum cleaned; tools need to be washed only with MAESTRO TOOL WASHING AGENT.

Interval between applying two coats

24 hours, provided that working conditions are optimal (temperature of 18-22°C, relative humidity of 65% and good ventilation).

Packaging sets for