BETONTON Concrete paint -

BETONTON concrete paint is based on special acrylic polymer binders. It is suitable for all kinds of lime and cement surfaces, wear- and weather-resistant.

Thinner

Pure water

Tinting

System for machine tinting "Chromos-Svjetlost" enables obtaining a whole range of shades from our tint-card, including tint-cards of other producers and RAL card.

Application

BETONTON is intended for protection and decoration of all kinds of concrete and façade surfaces, stone, brick, salonit and similar surfaces. Surfaces to which BETONTON is to be applied needs to hard, dry, without any loose layers and clean. Concrete has to be at four weeks old. Prior to applying paint, surface needs to be impregnated using preservative basecoat or thinned paint (paint:water = 1:1).
After preservative basecoat is dry, BETONTON is applied. It should not be thinned and it should be applied in two coats using brush, roller or by spraying. Wait until the first coat is completely dry before applying the second one. Optimal working temperature should not be lower than +5°C or higher than +35°C.

Coverage

5-6 m²/l in one coat, depending on the surface absorption and roughness.
Keep from frost!

Product range

10 standard shades from our tint-card; it comes in white colour, but our system for machine tinting "Chromos-Svjetlost" enables obtaining a whole range of shades from our tint-card, including tint-cards of other producers and RAL card.

Packaging

0.75L 5L 15L