Boje, lakovi i žbuke - Chromos Svjetlost


Svjetlost

Walls rendering - outdoors - Decorative renders for protection of façades

Our product line includes decorative renders. Decorative renders are pasty ready-mix plasters, and considering the type of dispersive binder they can be divided in acrylic, silicate and silicon renders.

Each of these types is further divided according to the surface appearance and structure into smooth (equally levelled structure) and troweled (rough structure resembling the oak bark). Granulation for smooth renders varies from 1.0, 1,5, 2.0 and 2.5 mm, and for troweled ones 2,0 and 2,5 mm.

Renders come in white, but our system for machine tinting "Chromos Svjetlost" enables obtaining a wide range of shades from our tint-card.

Surfaces suitable for application of acrylic, silicate and silicon renders are as follows: all types of mineral renders, base coat thermal insulation systems, concrete surfaces, lime-cement and gypsum cardboards.

Prior to application of render be sure to apply primer!

FINALGRUND UNI is an universal primer and we recommend applying it under any type of render (acrylic, silicate or silicon). Since it is possible to obtain a colour as closest as possible to that of render itself, there will be no visible difference in colour between the render and surface in places where grain trowels the render.

FASENA primer should be applied under acrylic troweled renders, especially when renders are tinted, because this helps prevent problems of render and surface being of different shade. The same goes for FINALGRUND UNI.

SIMPRA IMPREGNACIJA (SIMPRA IMPREGNATION) can be used only with acrylic white renders and not too demanding surfaces (in any case not with low absorbing surfaces, gypsum cardboard boards and fibre-cement façade boards).

For low-absorbing surfaces it is recommended to apply FINALGRUND UNI as a primer under all types of render (acrylic, silicate and silicon).

Besides FINALGRUND UNI (white or tinted) KEMOSIL SILIKATNA BOJA (silicate colour) or KEMOSIL SILIKATNA PRESERVATIVE BASECOAT can be used as a primer under silicate renders.

FINALGRUND UNI can be used as a primer under silicone render.

WARNING: When applying silicate render be sure to take into consideration the type of surface. In any case silicate render cannot be applied on old dispersion coatings.

In any case do not use organic colorants for tinting silicate renders.